كيف تحدد بأحترافية الفروق بين IOS Image الخاصة بسيسكو

Platform

a – APPN
a2 – ATM
b – Appletalk
boot – used for boot images
c – Comm-server/Remote Access Server(RAS) subset (SNMP, IP, Bridging, IPX, AT, Decnet, FR, HDLC, PPP, X.25, ARAP, tn3270, PT, XRemote, LAT)
c – Comm-server Lite(CiscoPro)
c2 – Comm-server/Remote Access Server(RAS) subset
d – Desktop subset (SNMP, IP, Bridging, WAN, Remote Node, Terminal Service, IPX, AT, ARAP)
d2 – reduced Desktop subset (SNMP, IP, IPX, AT, ARAP)eboot – ethernet boot image for mc3810 platform
f – FRAD subset (SNMP, FR, PPP, SDLLC, STUN)
f2 – modified FRAD subset (EIGRP, Pcbus, Lan Mgr, removed, OSPF added)
g – ISDN subset (SNMP, IP, Bridging, ISDN, PPP, IPX, AT)
g2 – gatekeeper proxy, voice and video
i – IP subset(SNMP, IP, Bridging, WAN, Remote Node, Terminal Service)
i2 – subset similar to IP subset for system controller image(3600)
i3 – reduced IP subset with BGP/MIB, EGP/MIB, NHRP, DIRRESP removed
j – enterprise subset (formerly bpx, includes protocol translation)
k – kitchen sink (enterprise for high-end)
l – IPeXchange IPX, static routing, gateway
m – RMON (11.1 only)
n – IPX
o – FIrewall (Formerly IPeXchange Net Management)
p – Service Provider (IP RIP/IGRP/EIGRP/OSPF/BGP, CLNS, ISIS/IGRP)
p2 – Service Provider w/CIP2 ucode
p3 – AS5200 service provider
p4 – 5800(Nitro) service provider
q – Async
q2 – IPeXchange Async
r – IBM base option (SRB, SDLLC, STUN, DLSW, QLLC) – comes with i, in, d
r2 – IBM variant for 1600 images
r3 – IBM variant for Ardent images (3810)
r4 – reduced IBM subset with BSC/MIB, BSTUN/MIB, ASPP/MIB, RSRB/MIB removed
s – source route switch (SNMP, IP, Bridging, SRB) (10.2 and following)
s – (11.2 only) addition to the basic subset (Plus version)
c1000 – (OSPF, PIM, SMRP, NLSP, ATIP, ATAURP, FRSVC, RSVP, NAT)
c1005 – (X.25, full WAN, OPSPF, PIM, NLSP, SMRP, ATIP, ATAURP, FRSVC, RSVP, NAT)
c1600 – (OSPF, IPmulticast, NHRP, NTP, NAT, RSVP, FRSVC)
c2500 – (NAT, RMON, IBM, MMP, VPDN/L2F)
c2600 – (NAT, IBM, MMP, VPDN/L2F, VoIP and ATM)
c3620, 3640 – (NAT, IBM, MMP, VPDN/L2F) in 11.3T added VoIP
c4500 – (NAT, ISL, LANE, IBM, MMP, VPDN/L2F)
c5200 – (PT, v.120, managed modems, RMON, MMP, VPDN/L2F)
c5300 – (MMP, VPDN, NAT, managed modems, RMON, IBM)
c5rsm – (NAT, LANE and VLANS)
c7000 – (ISL, LANE, IBM, MMP, VPDN/L2F)
c7200 – (NAT, ISL, IBM, MMP, VPDN/L2F)
rsp – (NAT, ISL, LANE, IBM, MMP, VPDN/L2F)
t – (11.2)AIP w/ modified Ucode to connect to Teralink 1000 Data
u – IP with VLAN RIP (Network Layer 3 Switching Software, rsrb, srt, srb, sr/tlb)
v – VIP and dual RSP(HSA) support
w – Reserved for WBU
w2 – Reserved for CiscoAdvantage ED train
w3 – Reserved for Distributed Director
x – X.25 in 11.1 and earlier release
y – reduced IP (SNMP, IP RIP/IGRP/EIGRP, Bridging, ISDN< PPP) (C1003/4)
– reduced IP (SNMP, IP RIP/IGRP/EIGRP, Bridging, WAN – X.25) (C1005)
(11.2 – includes X.25) (C1005)
y – IP variant (no Kerberos, Radius, NTP, OSPF, PIM, SMRP, NHRP…) (C1600)
y2 – IP variant (SNMP, IP RIP/IGRP/EIGRP, WAN – X.25, OSPF, PIM) (C1005)
y2 – IP Plus variant (no Kerberos, Radius, NTP…) (C1600)
y3 – IP/X.31
Y4 – reduced IP variant (Cable, Mibs, DHCP, EZHTTP)
z – managed modems
40 – 40 bit encrytion
56 – 50 bit encryption
56i – 56 bit encryption with IPSEC

هذه تقريبا أغلبها ولكن ليس كلها

القسم الثالث

f – Flash
m – RAM
r – ROM
l – relocatable
z – zip compressed
x – mzip compressed

IP Base
IP Voice
Enterprise Base
Advanced Security
SP Services
Advanced IP Services
Enterprise Services
Advanced Enterprise Services